MAIN
CHARACTERISTICS |
|
|
|
|
| STRUCTURAL MATERIALS |
Hot galvanised A42b steel, in compliance with UNE ISO 1461:1999 |
Hot galvanised A42b steel, in compliance with UNE ISO 1461:1999 |
Anodised aluminium 6082 T6
|
Steel bar reinforced concrete |
| UNIT DIMENSIONS |
AC0: 10 x 3 m |
AW1: 10 x 2,5m |
LW1:10x2,5m |
12 x 3 m |
AC1: 10x 2,5 m |
AW2: 12 x 2 m |
LW2: 12x 2 m |
|
AC2: 12 x 2 m |
|
|
|
PLATFORM LOAD
LIMITS |
150 kg/m2 |
150kg/m2 hasta 300 kg/m2 |
150 kg/m2 |
400 kg/m2 |
| UNIT WEIGHT |
3.350 kg |
4.400 kg |
2.950 kg |
12.000 kg |
| DECK |
Tropical wood |
Concrete / tropical wood |
| Deck properties |
Very hard, dense wood. Highly resistant to fungi and wood-eating and boring insects. |
Hardened and resistant to extreme temperatures. |
| Deck density |
1.050 to 1.200 kg/m3 |
Wood: 1,050 to 1,200kg/m3 Concrete: 2,250kg/m3 |
No. CONCRETE
FLOATS PER UNIT |
2 |
2-3 |
2 |
Integral structure with polystyrene core |
No. POLYETHYLENE
FLOATS PER UNIT |
8 |
8-10 |
8 |
JOINTS BETWEEN
SECTIONS |
Galvanised steel bolts and washers cushioned with neoprene elastomers. |
| Traction break load |
260 kg/cm2 |
| 300% stretch load |
90 kg/cm2 |
Stretch breaking
point |
600% |
| UTILITY DUCTS |
On both sides of the pontoon, for water pipes and electricity cables. |
| Duct section |
90x175 mm |
- |
| Duct protection |
Covered with anodised aluminium panels. |
MOORING
EQUIPMENT |
Aluminium/stainless steel cleats and bitts, and galvanised steel docking hoops are fastened to the structure with galvanised steel bolts. |
| FENDER MATERIALS |
Tropical wood |
Treated pine |
| FENDER SECTION |
160 x 45 mm |
160 x 45 mm |
160 x 25 mm |
145 x 70 mm |
